Start The Washing Program And Set The Final Spin Speed; During The Washing Program - Aeg Oko-Lavamat 62310 Operating Instructions Manual

Start the washing program and set the final spin speed

0 Check if the water tap is open.
0 Switch on the washing machine: press the ON/OFF button.
– The washing program starts automatically after six seconds.
– As soon as the door is locked the ON/OFF display lamp lights up
(max. 15 seconds after the start).
For the programs STAIN, MAIN WASH and QUICK WASH immediately
3
after the program has started the program selector moves to a position
directly behind QUICK WASH. Then it displays the program progress as
usual.
0 If necessary reduce the final spin speed or select RINSE
HOLD: Press the appropriate button and the display of
the requested spin speed (or RINSE HOLD) will light up.
If RINSE HOLD is selected, the washing stays in the final
rinse water, it is not spun.

During the washing program

You can at any time
– change the setting of the final spin speed,
– select RINSE HOLD,
– change the setting of the temperature.
Other settings cannot be changed.
To stop the washing program prematurely:
0 Press the ON/OFF button.
0 Turn the program selector clockwise to PUMP OUT.
0 Press the ON/OFF button again.
Run wash cycle
23