Table of Contents
Advertisement
A.
Socket Head Cap Screw
B.
Adjustable Weight
C.
Shaft
D.
Fixed Weight
Figure 11. Example of Adjustable Weights Set at 50%
Martin Engineering M3910-04/19
Figure 10. Adjusting Eccentric Weights
Weight adjustment disk attached to fixed weight
Arrow shows
direction to turn
adjustable weight
to increase
unbalance
4. See Figure 11. Rotate adjustable eccentric weight to proper setting. To
produce more force, move weight to higher setting (i.e., higher number).
When set, tighten socket head cap screw according to Table II.
5. Check o-rings for damage. Replace if damaged.
Do not operate vibrator with weight covers removed. Dust
accumulating around vibrator shaft could cause unit to fail.
6. Replace weight covers.
A
B
C
CAUTION
!
18
D
®
Martin
Electric Vibrators
Advertisement
Table of Contents
