Sinclair SCMI-01.4 User Manual page 22

After opening this menu:
IdleTime
xxx
You can use the ▼/▲ and ENTER keys to set the timeout from 1 to 999 sec. and then long
press the ENTER key to save the set value. Saving is briefly confirmed by message Save
OK and then the display returns one level back in the menu.
Setting the language version
The default factory language set is CZE+ENG (Czech + English). Using the
USBCommunicator, it is possible to upload the SCMI-01.4 menu in the desired language set,
consisting of two language versions: the required language + English. You can choose from
5 language sets (CZE+ENG, GER+ENG, CRO+ENG, POL+ENG, SVK+ENG). The upload
instructions are described in manual to USBC.
Display
Language
After opening this menu:
Language
Cesky
or
Language
English
The current (selected) language version is followed by the sign <.
You can use the ▼/▲ keys to change the language version and then press the ENTER key
to save the setting. Saving is briefly confirmed by the message Zaps. OK for the Czech
version or Saved OK for the English version and then the display returns one level back in
the menu.
- 20 -