Settings The Display - Sinclair SCMI-01.4 User Manual

4.7. Settings the Display

This menu allows you to set the parameters of the display of the SCMI-01.4 control module.
Press the ENTER key to enter the setting menu and use the ▼/▲ keys to select the Display
menu.
Settings
Display
After opening this menu, you can set the following display parameters.
Backlit
Contrast
IdleTime
Language
Setting the backlight and contrast of the LCD
Both settings are similar and you can do this without entering the password to logging in.
After opening the Display menu, the menu item for setting the backlight is displayed.
Display
Backlit
After opening this menu, the current backlight level is displayed using 1 to 16 bars.
Backlit
||||||||
You can use the ▼/▲ keys to change the backlight level and then use the ENTER key to
save the setting. In a similar way, you can set the contrast of the LCD.
Setting the timeout
This menu allows you to set the time period after which the display returns to the default
screen if the operator is not active. To set the time period of inactivity, open the Display
menu and then open the IdleTime menu.
Display
IdleTime
-
Setting the brightness of the LCD backlight.
-
Setting the contrast of the LCD.
-
Setting the time period to restore the default screen of the display, if
the operator is idle.
-
Setting the language version.
- 19 -