Sony STR-DG810 Operating Instructions Manual page 70

Sony operating instructions multi channel av receiver str-dg810
Hide thumbs Also See for STR-DG810:
Table of Contents

Advertisement

XM Radio messages list
Message
Explanation
appears
ANTENNA
The XM antenna is not connected
or transmission is not being
received properly.
UPDATING
The encryption code is being
updated.
NO SIGNL
The signal is too weak.
LOADING
The audio channel or information
is being acquired.
OFF AIR
The selected channel is off the air.
– – – –
There is no characteristic
information such as an artist name,
song title or program title
available.
– –
The preset number entered is
invalid number.
XM – – – CH
The selected channel is not
available.
70
US
Remedies
Make sure that the antenna is securely connected.
Try to disconnect the antenna then reconnect, or
turn off the power then turn back on.
Wait until the encryption code has been updated.
Make sure that the antenna is securely connected.
Adjust the antenna so that the signal is as strong as
possible.
Wait until the audio channel or information has
been acquired.
Make sure that you selected the channel properly.
Try to select another channel.
Enter a number from 1 to 30.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str dg810 - 6.1 channel home theater receiver

Table of Contents