Sony STR-DH810 Operating Instructions Manual page 37

2: Performing Auto Calibration
BD
TV
SA-CD/
DMPORT
CD
HDMI 1
HDMI 4
,
V/v/B/b
O
MENU
<
.
m
MUTING/
1
Press AMP MENU.
2
Press V/v repeatedly to select
"<AUTO CAL>", then press
or b.
?/1
AMP
SAT/
DVD
CATV
VIDEO 1 VIDEO 2
Input
buttons
TUNER
HDMI 2 HDMI 3
AMP
MENU
MENU/
HOME
<
>
M
X x
MASTER
VOL +/–/
+/–
3
Press V/v repeatedly to select
"A.CAL START", then press
Measurement starts in 5 seconds. A count
down is displayed.
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
Measurement for
Speaker existence
Speaker gain, distance,
frequency response
Subwoofer gain and distance
* The corresponding speaker indicator lights
up on the display during measurement.
Tips
• Operations other than turning the receiver on or off
are deactivated during the measurement.
• The measurements may not be performed correctly
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
To cancel Auto Calibration
The Auto Calibration function will be
canceled when you do the following during the
measurement process:
– Press ?/1.
– Press the input buttons or turn the INPUT
SELECTOR on the receiver.
– Change the volume level.
– Press MUTING (RM-AAP049 only) or
(RM-AAP050 only).
– Press SPEAKERS on the receiver.
– Connect headphones.
.
Display
TONE
T.S.P.*
WOOFER*
37 GB