Sony STR-DH810 Operating Instructions Manual page 76

Menu Parameters
[Display] [Display]
HDMI Control for HDMI
[<HDMI>] [CTRL: HDMI]
(page 83)
HDMI Pass through
[PASS THRU]
Setting HDMI audio input
[AUDIO OUT]
Subwoofer level for HDMI
[SW LEVEL]
Subwoofer Low Pass Filter for
HDMI
[SW L.P.F.]
Audio Return Channel
[ARC]
SYSTEM Brightness of the display
[<SYSTEM>] [DIMMER]
(page 85)
Sleep Timer
[SLEEP]
Auto standby mode
[AUTO STBY]
Naming inputs
[NAME IN]
S-AIR S-AIR ID
[<S-AIR>] [S-AIR ID]
(page 85)
Pairing
[PAIRING]
S-AIR mode
[S-AIR MODE]
RF Change
[RF CHANGE]
S-AIR Standby
[S-AIR STBY]
a)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
b)
You can only select this parameter if "SP PATTERN" is not set to a setting with surround back or front high
speakers (page 78).
c)
Depending on the speaker pattern setting, some parameters may not be available.
d)
You cannot select this setting if your speaker is set to "LARGE".
e)
This parameter is only available when HDMI input signals is detected.
f)
"FEET" for models of area code U2.
g)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
76
GB
e)
e)
g)
g)
g)
g)
g)
Settings
CTRL ON, CTRL OFF
ON, AUTO, OFF
AMP, TV+AMP
SW AUTO, SW +10 dB, SW 0 dB
L.P.F. ON, L.P.F. OFF
ARC ON, ARC OFF
DIM MAX, DIM MID, DIM OFF
2:00:00, 1:30:00, 1:00:00, 0:30:00,
OFF
STBY ON, STBY OFF
For details, see "Naming inputs"
(page 44).
ID: A, ID: B, ID: C
START, CONDITION
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
STBY ON, STBY OFF
Initial
setting
CTRL ON
OFF
AMP
SW AUTO
L.P.F. ON
ARC ON
DIM OFF
OFF
STBY ON
ID: A
START
PARTY
RF AUTO
STBY OFF