7: Connecting The Ac Power Cord (Mains Lead) - Sony STR-DH810 Operating Instructions Manual

2
Insert the wireless transmitter.
EZW-T100 slot
0 0
- T 1
E Z W
Wireless transmitter
Notes
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
• Do not insert other than the wireless
transmitter into the EZW-T100 slot.
3
Use the screws that you removed from
step 1 to fasten the wireless
transmitter.
0 0
- T 1
E Z W
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
Refer to the operating instructions supplied
with the surround amplifier and S-AIR
receiver.
7: Connecting the AC
power cord (mains lead)
Connect the AC power cord (mains lead) to a
wall outlet.
Note
Before connecting the AC power cord (mains lead),
make sure that metallic wires of the speaker cords
are not touching each other between the
SPEAKERS terminals.
AC power cord (mains lead)
TV OUT
ARC
OUND
L
NT A
L
To the wall outlet
33 GB