Sony STR-DG500 Operating Instructions Manual page 12

Name Function
P Control
After pressing AMP MENU
buttons
(C), DVD MENU (H), or
MENU (N), press the control
button V, v, B or b to select
the settings. When you press
DVD MENU or MENU, press
the control button to enter the
selection.
Q DISPLAY
Press to select information
displayed on the TV screen of
the VCR, satellite tuner, CD
player, DVD player, or MD
deck.
R TOOLS
Press to display options
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
S -/--
Press -/-- and TV (M) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
>10/
Press to select
x
– track numbers over 10 of the
– channel numbers of the
CLEAR
Press to
– clear a mistake when you
– return to continuous
T Numeric
Press to
buttons – preset/tune to preset
a)
(number 5 )
– select track numbers of the
– select channel numbers of
Press the numeric buttons and
TV (M) at the same time to
select the TV channels.
U A.F.D.
Press to select A.F.D. mode.
V 2CH
Press to select 2CH STEREO
mode.
12 GB
VCR, satellite tuner, CD
player or MD deck.
Digital CATV terminal.
press the incorrect numeric
button.
playback, etc. of the satellite
tuner or DVD player.
stations.
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
the VCR or satellite tuner.
Name Function
W Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can change the button
assignments following the
steps in "Changing button
assignments" on page 64.
Button
VIDEO 1
VIDEO 2
VIDEO 3
DVD
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
TUNER
X TV/VIDEO
Press TV/VIDEO and TV
(M) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
Y AUTO CAL
Press to activate the Auto
Calibration function.
a)
The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 2)
Not assigned
DVD player
player
Built-in tuner