Sony STR-DG1100 Operating Instructions Manual page 82

5
Press the numeric buttons to
enter the channel number.
6
Press .
The selected channel is tune in.
Presetting the channels
You can select the channels you want directly
by presetting them using the preset numbers.
You can preset up to 30 XM Radio channels
and 30 SIRIUS Satellite Radio channels.
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 37).
82
GB
2
Press V/v repeatedly to select
"XM" or "SIRIUS," then press
3
Select a channel you want to
preset using Category Tuning
(page 80) or Direct Tuning
(page 81).
4
Press OPTIONS.
5
Press V/v to select "Memory,"
then press
6
Press V/v repeatedly to select
the preset channel you want to
use as the preset channel, then
press
Preset channels from 1 to 30 are available,
1 and a default channel is preset for all the
preset channels when you purchase the
receiver.
The selected channel is registered as the
preset channel you selected in step 3.
7
Repeat steps 3 to 6 to preset
another channel.
2,
5,6
To select the preset channels
1
Repeat steps 1 and 2 of "Presetting the
4
channels".
2
Press V/v to select the preset number
from the preset list, then press
You can select stored preset channels
from 1 to 30.
Notes
• The channel information you have preset may be
changed if XM Satellite Radio Inc. or SIRIUS
Satellite Radio Inc. change their channel
programming.
• When the "Category Mode" screen is displayed,
press OPTIONS, then press V/v to select "Preset
Mode."
or b.
to enter.
.
.