Sony STR-DG1100 Operating Instructions Manual page 124

Frequency response
PHONO
MULTI CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD/BD,
TV, SAT/CATV,
VIDEO 1/2/3
Inputs (Analog)
PHONO
MULTI CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD/BD,
TV, SAT/CATV,
VIDEO 1/2/3
Inputs (Digital)
DVD/BD,VIDEO 2,
SA-CD/CD (Coaxial)
VIDEO 1, VIDEO 3,
SAT/CATV, TV, MD/
TAPE (Optical)
Outputs
MD/TAPE (REC OUT),
VIDEO 1 (AUDIO OUT)
FRONT L/R, CENTER,
SURROUND L/R,
SURROUND BACK L/R,
SUB WOOFER
EQUALIZER
Gain levels
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
124
GB
RIAA equalization curve
± 0.5 dB
10 Hz – 100 kHz
± 3 dB
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N: 90 dB (A, 20 kHz
LPF)
Sensitivity: 150 mV
Impedance: 50 kohms
S/N: 100 dB (A, 20 kHz
LPF)
Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz
LPF)
S/N: 96 dB
(A, 20 kHz LPF)
Voltage:150 mV
Impedance: 1 kohm
Voltage: 2 V
Impedance: 1 kohm
±10 dB, 1 dB step
87.5 – 108.0 MHz
FM wire antenna (aerial)
75 ohms, unbalanced
AM tuner section
Tuning range
With 10-kHz tuning scale
With 9-kHz tuning scale
Antenna (aerial)
3)
You can change the AM tuning scale to either 9
kHz or 10 kHz. After tuning in any AM station,
turn off the receiver. While holding down
TUNING MODE, press POWER on the receiver.
All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9
kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
COMPONENT VIDEO:
HDMI Video
Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1440 × 480p@59.94/60 Hz (pixel sent 2times)
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920 × 1080p@59.94/60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz (pixel sent 2times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
3)
530 – 1,710 kHz
3)
531 – 1,710 kHz
Loop antenna (aerial)
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P /C : 0.7 Vp-p, 75 ohms
B B
P /C : 0.7 Vp-p, 75 ohms
R R
80 MHz HD Pass Through