Sony STR-DG1100 Operating Instructions Manual page 11

Remote commander
You can use the supplied remote RM-AAP018
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate (page 112).
RM-AAP018
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby)
video components that the
remote is assigned to operate
(page 112).
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1 (on/
Press to turn the receiver on or
standby) off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
Press one of the buttons to
buttons select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
(wj). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components (page 49). You can
program the remote to control
non-Sony components
following the steps in
"Programming the remote"
(page 112).
D TEST TONE Press to output the test tone
from each speaker.
E AMP
Press to enable the receiver
operation (page 37).
F MUSIC
Press to select sound field
(page 61).
G MOVIE
Press to select sound field
(page 61).
continued
11 GB