Sony STR-DG1100 Operating Instructions Manual page 17

b)
If you connect only one surround back
speaker, connect it to the SURROUND
BACK SPEAKERS L terminals.
c)
When you connect a sub woofer with an auto
standby function, turn off the function when
watching movies. If the auto standby
function is set to on, it turns to standby mode
automatically based on the level of the input
signal to a sub woofer, then sound may not
be output.
Notes
• When you connect all the speakers with a nominal
impedance of 8 ohms or higher, set "Impedance" in
the Speaker settings menu to "8 Ω." In other
connections, set it to "4 Ω." For details, see "8:
Setting the speakers" (page 40).
• Before connecting the AC power cord (mains
lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
17 GB