Sony STR-DG1100 Operating Instructions Manual page 81

1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 37).
2
Press V/v repeatedly to select
"XM" or "SIRIUS," then press
or b.
3
Press V/v repeatedly to select
the category, then press
• ALL: You can select a channel from all
the categories.
• (category name): You can select a
channel from one category.
XM
SIRIUS
When the "Preset Mode" screen is
displayed, press OPTIONS, then press V/
v repeatedly to select "Category Mode."
4
Press V/v to select the channel,
then press
The selected channel is being received.
The channel information is displayed on
the TV screen.
.
.
Note
When you select a channel in the "Category Mode,"
the channel you selected may not be the one in the
category you want. This is because one channel may
belong to more than one category.
Selecting a channel by inputting
the channel number directly
1
Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed in the display window of the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 37).
2
Press V/v repeatedly to select
"XM" or "SIRIUS," then press
or b.
3
Press OPTIONS.
4
Press V/v to select "Direct
Tuning," then press
1
5
2,
4,6
3
.
continued
81 GB