Clear All Phones; Preset All Relays - Select Engineered Systems Select Gate 1A User/Installer Manual

SELECT GATE SG-1A V1.X
4.2.24 CALL FORWARD ON/OFF (Function 65)
This feature permits remote control of the call forward number to be enabled or disabled.
This feature is controlled by programming from a Touch-Tone™ phone either at the house, or from
an outside line.
To change call forwarding tone from 0 (disabled)to enabled (1):
CLEAR ALL PHONES (Function 91)
4.2.25
To clear all programmed phone numbers from the Select Gate, press the sequence 91 followed
by 1010 and *. The 1010 is to keep from inadvertently erasing any functions by accident.
4.2.26 CLEAR ALL PINS (Function 92)
To clear all programmed PIN Codes from the Select Gate, press the sequence 92 followed by
1010 and *. The 1010 is to keep from inadvertently erasing any functions by accident.
PRESET ALL RELAYS (Function 94)
4.2.27
To clear all programmed relay parameters from the Select Gate, press the sequence 94 followed
by 1010 and *. The 1010 is to keep from inadvertently erasing any functions by accident. This will
set all relay functions and times back to factory defaults.
SELECT ENGINEERED SYSTEMS 11/01 27