DISPLAY MODES
•
CRUISE CONTROL (third mode)
The default setting is Cruise Control off (letter "n" to indicate).
Press
or
to choose enable Cruise Control
(Letter "Y" to indicate).
Long touch
to save setting.
Short touch
to enter forth mode.
SET KM OR MILE(forth mode)
The default setting is km/h(letter "0" to indicate).
Press + or
- to change to km or mile(letter "1" indicate mile).
Long touch
to save setting.
The default setting is photocell on(letter "Y" to indicate).
Press + or - to choose
W
h
e
n
e l
t t
r e
s i
"
Y
, "
value is 510. Press +/- to turn up/down the value. After saving setting, the
front & rear LED lights will turn on automatically if the ambient photographic
is lower than set value. Otherwise the lights will be off.
Long touch
to save setting.
Short touch
•
TRIP RESET
Reset TRIP by long press
OTHER DISPLAY MODES ARE:
•
TRIP- your trip distance since your last trip reset. Press to
•
ODO - your scooter total distance since its factory assembled,
or new / repaired battery was placed.
•
Battery voltage - Your battery state.
•
Error - your system has encountered an error, please contact your local
disable photocell(letter "n" to indicate).
p
e r
s s
21
swap.