Table of Contents
Advertisement
•
Ensure that all bolts are tightened and
secured before operation.
•
Where fitted, always ensure that the
boom is securely supported when
travelling.
•
Area surrounding equipment may
become slippery when wet.
NOTES
•
Always read and understand the
operator's manual prior to operation of
this equipment.
•
It is the responsibility of the operator
to ensure that there are no decals
missing from the equipment and that any
damaged or missing decals are replaced
prior to operation.
•
Goldacres equipment ordered or
operated, outside the guideline
limitations may not be warranted by
Goldacres for successful performance.
Operators working outside these
limitations do so at their own risk, unless
specific advice has been sought from
and provided by Goldacres in writing.
•
Always read and follow the chemical
manufacturer's guidelines for safe
application as per the chemical label.
Particular attention should be given to
the recommended target application rate
of the chemical being applied as per the
chemical label.
•
Inspect the equipment thoroughly for
damage and wear before operation.
•
Flush chemicals from equipment
immediately after use.
•
Certain chemicals may be unsuitable for
use with Goldacres standard plumbing
designs. Consult your Goldacres dealer if
in doubt.
•
Do not operate the equipment while
under the influence of any drugs, alcohol
or if excessively tired.
•
Make sure that the equipment complies
with all relevant road regulations when
transporting.
•
When draining fluids from the equipment
use appropriate, leak proof containers.
Do not use food or beverage containers
as someone may consume the contents
by mistake.
•
After reading the operator's manual
if there is any thing that you do not
understand please contact your
Goldacres dealer.
Safe Chemical Use
The safe use of Ag chemicals with this
equipment is the responsibility of the owner/
operators. All operators should be trained
in the safe use of Ag chemicals. Goldacres
suggest that a relevant course is completed
by owners/operators prior to operation of
this equipment as a spray unit.
Personal Protective Equipment (PPE)
Always wear close fitting clothing and safety
equipment designed for the job.
Chemicals can be harmful to humans,
appropriate PPE should be used when
handling chemicals.
Always refer to the chemical manufacturers
label for guidelines on the appropriate PPE
to use with the chemicals you are using.
Goldacres also suggest that you read
and understand the following Australian
standards:
•
Australian Standard for Chemical
protective clothing AS3765
•
Australian Standard for Respiratory
protection devices AS1715
Airborne particles
Always stand well clear of equipment during
operation. Any spray drift is dangerous and
may be hazardous to humans and animals.
Fluids under pressure
Do not disconnect any hoses, nozzles
or filters while equipment is operating.
Disconnecting these components while
under pressure may result in uncontrolled
fluid discharge which may be hazardous.
When the repair is complete ensure that
all fittings and lines are secured before re-
applying pressure.
5
Continued over page
Advertisement
Table of Contents
