Status Indicators - Acer PD1520 Series User Manual

Problem
Power LED is flashing
amber, is solid blue, and
Temp LED is flashing amber
The remote control is not
operating smoothly or
works only within a limited
range

Status Indicators

Projector
Description
Status
Standby Projector in Standby mode.
mode Ready to power on.
Power on Projector in Normal mode,
ready to display an image.
Projector Air vents might be blocked
overheated or ambient temperature may
be above 35ºC. The projector
automatically shuts down.
Ensure that the air vents are not
blocked and that the ambient
temperature is within operational
range. If the problem persists,
contact us.
Fan One of the fans has failed. The
breakdown projector automatically shuts
down. If the problem persists,
contact us.
LED failure LED shutdown.
Note:
If the projector fan fails, the projector will automatically shut down. Reset the projector mode
by pressing and holding the Power button for 10 seconds. Please wait for about 5 minutes
and try to power up again.
52 English
Possible Solution
The projector has overheated. The display automatically
y
shuts down. Turn the display on again after the projector
cools down. If the problem persists, contact Acer.
If the projector fan fails, the projector will automatically shut
y
down. Clear the projector mode by pressing and holding the
Power button for 10 seconds. Please wait for about 5 minutes
and try to power up again. If the problem persists, contact
Acer.
The battery may be low. If so, replace with a new CR2025
y
battery.
Power
(Blue / Amber)
Amber
Blue
Amber flashing Amber
Amber flashing
and Blue ON
Amber flashing OFF
Temp Lamp
(Amber) (Amber)
OFF OFF
OFF OFF
OFF
Amber flashing OFF
(0.5 seconds
off,
2 seconds on)
Amber