Image - Acer PD1520 Series User Manual

Image

Projection: Select the projection mode, depending upon how the projector is
mounted.
Auto Keystone: On
y
Auto Keystone: Off
y
Aspect Ratio: Adjust the aspect ratio to match the video source. Options are:
Auto: Automatically selects the appropriate display format.
y
16:9: The input source scales to fit the screen and projects a 16:9 image.
y
4:3: The input source scales to fit the screen and projects a 4:3 image.
y
Zoom: Zoom in or out of the image.
Sharpness: Adjust the sharpness of the image.
H. Position: Shift the projected image position horizontally.
V. Position: Shift the projected image position vertically.
Frequency: Change the display data clock frequency to match the frequency of your
computer's graphics card. If you see a vertical flickering wave, use the Frequency
control to minimize the bars. This is a coarse adjustment.
Note: The Frequency can be adjusted only in VGA mode.
30 English
Projection
Aspect Ratio
Zoom
Sharpness
H. Position
V. Position
Frequency
Phase
Select
Direct projection
Rear projection
Direct projection
Rear projection
Ceiling mount projection
Ceiling mount rear projection
Image
Auto
Exit Enter