Table of Contents
Advertisement
Phase: Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note:
The Phase can be adjusted only in VGA mode.
3D
3D: Turn the 3D function on or off.
3D Format: Set up the 3D format according to the 3D input signal. Options are:
Auto, Frame Packing, Side by Side Half, Side by Side Full, Top and Bottom, and
Frame Sequential.
3D Sync. Invert: Turn the 3D sync. inverter option on or off.
Note:
- 3D/3D Sync. Invert cannot be changed when you select image settings.
- In 3D mode, the maximum supported input timing is 1024 x 768 @ 120Hz.
3D
3D
3D Format
3D Sync. Invert
Select
Exit
Off
Auto
Off
Enter
31
English
Hide quick links:
Advertisement
Table of Contents
