Sony STR-DA5300ES Operating Instructions Manual page 13

Name Function
Q F1/F2
Press TV (wk), then press F1 or
F2 to select a component to
operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc
Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc
Player
F2: VHS
MACRO1, Press AMP (5), then press
MACRO2 MACRO 1 or MACRO 2 to set
up the macro function
(page 122).
TV/INPUT
Press TV/INPUT and TV (wk)
at the same time to select the
input signal (TV input or video
input).
WIDE Press repeatedly to select the
wide picture mode.
PIP
Press SHIFT (wj), then press
PIP to switch the image of the
PIP (Picture in Picture) window.
The image will be changed as
follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You
can swap the position of the
main screen and the PIP
window (swap) by pressing the
(qa). You can expand or
shrink the window using V/v
(qa). You can also change the
window's position using B/b
(qa).
Note
The HDMI video signals are not
output while the PIP window is
displayed.
RESOLUTION Press SHIFT (wj), then press
RESOLUTION repeatedly to
change the resolution of signals
output from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack
(page 87).
Name Function
R DVD/
Press to display the menus of
TOP MENU, the DVD player on the TV
MENU screen. Then use V/v/B/b and
to perform a menu
operations (page 117).
NIGHT Press AMP (5), then press
MODE NIGHT MODE to activate the
NIGHT MODE function
(page 73).
INPUT
Press AMP (5), then press
MODE INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks
(page 92).
SLEEP Press SHIFT (wj), then press
SLEEP to activate the sleep
timer function and the duration
which the receiver turns off
automatically (page 99).
TEST TONE Press SHIFT (wj), then press
TEST TONE to output the test
tone from each speaker.
S MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
T MASTER
Press to adjust the volume level
VOL +/– of all speakers at the same time.
TV VOL +/– Press TV (wk), then press TV
VOL +/– to adjust the volume
level of the TV.
U DISC SKIP
Press to skip a disc when using
a multi-disc changer.
V RETURN/
Press to return to the previous
EXIT O
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
continued
13 GB