Direct Tuning - Sony STR-DA5300ES Operating Instructions Manual

Direct tuning

Enter the frequency of a station directly by
using the numeric buttons.
1
Press AMP MENU to display the
GUI menu on the TV screen.
If "GUI MODE" is not displayed in the
display window of the receiver, follow the
steps given in "7: Operating the receiver
using the GUI (Graphical User
Interface)" (page 41).
2
Press V/v repeatedly to select
"FM" or "AM," then press
b.
3
Press V/v to select "Direct
Tuning," then press
4
Press the numeric buttons to
enter the frequency, then press
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
4
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
1
(aerial) for optimum reception.
2-4
If you cannot tune in a station
"– – – .– – MHz" appears and then the display
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
or
.
to enter.
83 GB