Table of Contents
Advertisement
If you need to disable the WOL function on the Chromebox
Commercial 2, Please follow below procedures:
1. Log in to chrome OS and press Ctrl + Alt + T to enter the
Chrome OS command mode.
2. Key-in below command to disable WOL. To use this function,
turn Verification Off (Developer Mode).
crosh > shell
chronos@localhost / $ sudo su
Localhost / # set_wake_on_lan false
Note : The default WOL function will be restored after reboot.
External Power Switch
The external power switch at rear side of Chromebox Commercial 2
allows you to extend the power switch base your demand, and you can
decide your own switch specification and cable length depends on the
application, just follow the wire gauge and strip length provided below.
The design of external power switch is a screw-less type spring
clamp pluggable terminal block, you can insert a wire by press the button
on the terminal, please refer to the procedure below.
Step 1 Please prepare a pin or rod that hard enough for pushing the
button on the terminal block
Step 2 Push the button in the end and hold it
Step 3 Insert the wire into the hole and make sure the stripped portion is
fully inserted
Step 4 Release the pin or rod then the wire will clamp by the terminal block
20
Hide quick links:
Advertisement
Table of Contents
