About The Indications In The Display - Sony STR-DA4ES Operating Instructions Manual

Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs Also See for STR-DA4ES:
Table of Contents

Advertisement

About the indications in the display

1
SW
L.F.E.
qf
1 SW: Lights up when sub woofer selection is
set to "YES" and the receiver detects that the
disc being played back does not contain the
LFE channel signal. While this indicator
lights up, the receiver creates a sub woofer
signal based on the low frequency
components of the front channels.
2 Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters
vary to show how the receiver downmixes the
source sound (based on the speakers settings).
When using sound fields like "D.CONCERT
HALL", the receiver adds reverberation based
on the source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by
6.1 channel decoding)), SBL (Surround Back
Left), SBR (Surround Back Right)
Example:
Recording format (Front/Surround): 3/2
Output channel: Surround speakers absent
Sound Field: AUTO DECODING.
GB
32
2
3
PRO LOGIC
L
C
R
SL
S
SR
SB
L
C
R
SL
SR
4
5
a
DIGITAL
MULTI CH IN 1 2 D.RANGE
3 PRO LOGIC: Lights up when the receiver
applies Pro Logic processing to 2 channel
signals in order to output the center and
surround channel signals. However, this
indicator also lights when the Pro Logic II
movie/music decoder is in active. However,
this indicator does not light if the center and
surround speakers are set to "NO".
4 ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
5 MULTI CH IN 1/2: Lights up when MULTI
CH IN 1 or 2 is selected.
6 D.RANGE: Lights up when dynamic range
compression is activated. See page 55 to
adjust the dynamic range compression.
7 Tuner indicators: Light up when using the
receiver to tune in radio stations, etc. See
pages 28–30 for tuner operations.
8 EQ: Lights up when the equalizer is
functioning.
9 SLEEP: Lights up when sleep timer is
activated.
6
7
MEMORY
COAX SLEEP MONO
OPT
STEREO
DTS
MPEG
qd
qs
qa
q;
9
EQ
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-da7es

Table of Contents