Selecting The Surround Back Decoding Mode (Sb Decoding) - Sony STR-DA4ES Operating Instructions Manual
Hi-fi receivers: fm stereo/fm-am receiver
Hide thumbs
Also See for STR-DA4ES:
- Service manual (116 pages) ,
- Operating instructions manual (108 pages) ,
- Product information (2 pages)
Table of Contents
Advertisement
Tips
• When “PLII MUSIC” is selected, you can make
further adjustments using “CENTER WIDTH”,
“DIMENSION”, “PANORAMA” in the
SURROUND menu.
• You can select the 2 channel decoding mode using
“2CH MODE” in the CUSTOMIZE menu (page
47).
Selecting the surround
back decoding mode
(SB DECODING)
This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in the Surround EX
format*, you can enjoy the surround sound
intended by the filmmakers.
* Dolby Digital EX, DTS-ES Matrix, DTS-ES
Discrete 6.1, etc.
Press SURR BACK DECODING repeatedly
to select the surround back decoding
mode.
“SB DECODING XXXX” appears in the
display.
When the receiver is decoding the surround
back signal the “SB DEC” indicator lights up.
Surround back decoding modes
• AUTO
• MATRIX
• OFF
For details, see “How to select the surround
back decoding mode” on the next page.
Tip
You can select the surround back decoding mode
using “SB DECODING” in the CUSTOMIZE menu
(page 47).
Note
You cannot select the surround back decoding mode
when using the 2CH STEREO (page 34), ANALOG
DIRECT (page 34) or MULTI CH DIRECT mode
(page 28) or when headphones are connected.
continued
GB
Page 39
Hide quick links:
Advertisement
Table of Contents
