Adjusting The Sensitivity Of The Remote; Changing The Display Settings - Sony STR-D760Z Operating Instructions Manual

Additional Operations and Settings
Adjusting the Sensitivity of the
Remote
You can select from five sensitivity levels that
determine the speed at which the pointer moves.
1
Click SETUP in the main menu to display the
SETUP menu, then click OSD SETUP.
2
Click FEELING 1 to 5 to select the sensitivity level
you want.
The higher the number, the faster the speed.
AUTO PLAY
IR OUTPUT
AUTO OSD ERASE
SEE-THROUGH
LANGUAGE
POINTER ONLY
DEMO
FEELING
OSD POSITION
RETURN
46
OSD SETUP
ON OFF
ON OFF
ON OFF
ON OFF
ENGLISH
SET
START
1 2 3 4 5
SET
EXIT

Changing the Display Settings

Selecting the display parameters
You can select the display modes (AUTO OSD ERASE,
POINTER ONLY or DEMO) and the display type (SEE-
THROUGH or LANGUAGE). You can also switch the
IR OUTPUT setting when you connect the IR repeater.
1
Click SETUP in the main menu to display the
SETUP menu, then click OSD SETUP.
2
Select the display parameters you want to change.
OSD SETUP
AUTO PLAY
IR OUTPUT
AUTO OSD ERASE
SEE-THROUGH
LANGUAGE
POINTER ONLY
DEMO
FEELING
OSD POSITION
RETURN
• To select the display mode, click AUTO OSD
ERASE (ON or OFF), POINTER ONLY (SET) or
DEMO (START).
AUTO OSD ERASE: This display mode is useful
during LD player operations since it allows you
to see chapter numbers that otherwise might be
hidden by the control panel. When this mode is
on, control panels disappear whenever you
click and hold down the direction control
button on the remote. When you release the
button, the control panel reappears.
POINTER ONLY: This display mode allows you
to use the pointer to point to various on-screen
items, such as during a presentation (etc.).
When you click POINTER ONLY SET, the on-
screen display disappears except for the pointer
and an EXIT button. To freeze the pointer, hold
down the direction control button on the
remote.
DEMO: This display mode activates a program
that explains the various functions of the
receiver. Note that when the program is
running, it replaces previously stored data
(such as surround sound parameters) with
data from the program. Click START to
activate the program. To stop the program,
press any button on the remote or receiver.
ON OFF
ON OFF
ON OFF
ON OFF
ENGLISH
SET
START
1 2 3 4 5
SET
EXIT