Registering A Tv (Or Monitor) - Sony STR-D760Z Operating Instructions Manual

Registering a TV (or Monitor)

You must register the IR code of your TV (or monitor)
in order to turn on your TV automatically whenever
you turn on the receiver.
IR code registration is unnecessary in the
following case
If your TV is a Sony product that can be controlled by
an infrared remote, and it is connected to the receiver
by its VIDEO 1 video input jack, you do not need to
register its IR code.
Registering IR codes
1
Turn on the receiver and the TV.
Make sure the input selector on the TV is set to
the video input.
2
Click SETUP in the main menu.
FUNCTION SOUND
LIST SUB
BAND FM 102.50MHz
3
Click TV SET.
FUNCTION SOUND
TV SET
IR SET
USER IR
AUTO START
MACRO PLAY
Setting Up the Remote for On-Screen Control
SETUP
USER
– +
STEREO
SETUP
FUNC INDEX
CD INDEX
TUNER INDEX
SLEEP TIMER
OSD SETUP
4
• Sony TV
1 Click Sony TV.
2 Click VIDEO 1, 2 or 3 to select the video
input of the TV that is connected to the
receiver.
3 If your TV type is a wide screen type (screen
ratio:16 x 9), click WIDE (except for Australian
and Singaporean models).
The IR codes are automatically registered
and registration is complete.
TV MONITOR SET
TV IR SET
TV INPUT
TV SIZE
RETURN
• Non-Sony TV
1 Click OTHER TV.
2 Click VIDEO 1, 2 or 3 to select the video input
of the TV that is connected to the receiver.
3 If you are using a wide TV, click WIDE (except
for Australian and Singaporean models).
4 Go to step 5.
TV MONITOR SET
TV IR SET
TV INPUT
TV SIZE
RETURN
5
Cover the IR sensor on the TV to prevent
accidental operation. Otherwise, the on-screen
display may be turned off during the registration
procedure.
6
Click START.
TV MONITOR SET
TV IR SET
TV INPUT
TV SIZE
RETURN
Getting Started
Sony TV
OTHER TV
VIDEO 1 2 3
NORMAL WIDE
EXIT
Sony TV
OTHER TV
VIDEO 1 2 3
NORMAL WIDE
EXIT
Sony TV
OTHER TV
START
VIDEO 1 2 3
NORMAL WIDE
EXIT
(continued)
17