Tuning And Presetting Radio Stations - Sony STR-D760Z Operating Instructions Manual

Tuning and Presetting Radio
Stations
The receiver lets you directly enter a station's
frequency using the number buttons (Direct Tuning).
You can also tune a station by scanning stations
(Automatic Tuning), and by selecting preset stations
(Preset Tuning: see page 30).
1
Click FUNCTION in the main menu, then click
TUNER.
2
Click FM/AM to select FM or AM, then click SUB.
LIST
FM/AM FM 102.50MHz
3
Click DIRECT.
FUNCTION SOUND
A B C DIRECT
1 2 3 4
6 7 8 9
REC EDIT
LIST
FM/AM FM 102.50MHz
4
Click the number buttons to enter the frequency.
Example 1: FM 102.50 MHz
1 0 2 5 0
Example 2: AM 1350kHz
1 3 5
5
Repeat steps 2 to 4 to receive other stations.
If an FM stereo program is noisy
"STEREO" flashes next to the frequency. Click FM
MODE to change to monaural (MONO) reception.
There will be no stereo effect, but the reception will
improve. To return to the auto stereo mode, click this
icon again.
If "STEREO" remains off
Click FM MODE, even when an FM stereo broadcast is
received.
SUB USER
– +
STEREO
SETUP
FM MODE
5
0
EXIT
SUB USER
– +
STEREO
Playback/Recording
If an AM program is noisy
Adjust the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station and the entered
numbers are flashing
Make sure you have entered the right frequency. If not,
reenter the frequency you want.
If the entered numbers still flash, the frequency is not
used in your area.
If you enter a frequency not covered by the tuning
interval
The entered value is automatically rounded up or down
to the closest covered value.
Tuning intervals for Direct Tuning are:
FM: 50 kHz intervals
AM: 10 kHz intervals
(except for Australian and Singaporean models)
(to change to 9 kHz intervals, see page 64)
9 kHz intervals
To watch FM simulcast TV programs
Make sure that you tune in the simulcast program on
both the TV (or VCR) and the receiver.
Tuning radio stations by scanning stations
(Automatic Tuning)
1
Click FUNCTION in the main menu, then click
TUNER.
2
Click FM/AM to select FM or AM.
LIST
FM/AM FM 102.50MHz
3
Click + or –.
The frequency indication changes and scanning
stops when the receiver tunes in a station. To
continue scanning, click + or – again. Click + for a
higher station number; click – for a lower one.
When the scanning is finished, the receiver starts
scanning again.
LIST
FM/AM FM 102.50MHz
Getting Started
SUB USER
– +
STEREO
SUB USER
– +
STEREO
(continued)
29