Table of Contents
Advertisement
POWER ELECTRONICS
SAFETY
Before operating the equipment, read this manual thoroughly to
gain and understanding of the unit. If any doubt exists then
please contact POWER ELECTRONICS, (902 40 20 70 / +34 96
136 65 57) or your nearest agent.
Wear safety glasses when operating the equipment with power
applied and the front cover is removed.
Install the inverter according to the instructions within this
manual.
Ensure that the mounting orientation is correct.
Do not drop the gateway or subject it to impact.
The Profipower gateways contain static sensitive printed circuits
boards. Use static safety procedures when handling these
boards.
CONNECTION PRECAUTIONS
To ensure correct operation of the equipment it is recommended
to use a SCREENED CABLE for the control wiring.
TRIAL RUN
Follow the steps described in this manual.
Always apply voltage and current signals to each terminal that
are within levels indicated within this manual. Otherwise, damage
to the gateway may result.
SAFETY INSTRUCTIONS
PROFIPOWER
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Profipower and is the answer not in the manual?