Log In To The Oracle Fabric Manager Interface - Oracle Fabric Interconnect F2-12 Installation Manual

Log In to the Oracle Fabric Manager Interface

■
Start an SSH session to the SCP's IP address, then issue
■
Oracle Fabric OS.
At the completion of this command, the Oracle Fabric OS CLI is displayed for the Oracle
Fabric OS controller.
[root@SCP_IP_address ~]# su admin
Copyright (c) 2012, 2016, Oracle and/or its affiliates. All rights reserved.
admin@ovn82-102[OFOS]
2. Consider your next steps.
If this is the first login to the Oracle Fabric OS, the Oracle Fabric OS
■
configuration wizard runs automatically.
See
Otherwise, you can now administer the switch through the Oracle Fabric OS.
■
Refer to the Oracle Fabric OS documentation for further instructions.
Related Information
"Verify LED Status" on page 89
■
"Verify That the Switch Is Operational" on page 94
■
"Verify Connectivity" on page 96
■
"Log In to the Oracle Fabric Manager Interface" on page 106
■
"Run the Oracle Fabric OS Configuration Wizard" on page 102
■
"Oracle Fabric OS Configuration Wizard Parameters" on page 104
■
Log In to the Oracle Fabric Manager Interface
When you log in to the Oracle Fabric OS interface for the very first time, the Oracle Fabric OS
configuration wizard starts. Oracle Fabric Manager uses information that the Oracle Fabric OS
configuration wizard requires. You must complete the Oracle Fabric OS configuration wizard
before you can manage the switch through Oracle Fabric Manager.
Run the Oracle Fabric OS configuration wizard.
1.
106 Oracle Fabric Interconnect F2-12 Installation Guide • November 2016
hostname is the host name assigned by DHCP or that you configured in
Static IP Address to the SCP" on page
Welcome to OFOS Controller
Enter "help" for information on available commands.
Enter the command "show system copyright" for licensing information
"Run the Oracle Fabric OS Configuration Wizard" on page
85.
102.
"Assign a
to start the
su admin