Table of Contents
Advertisement
Log In to the Oracle Fabric Manager Interface
0/4
.
.
.
0/27
0/28
0/29
0/30
30 records displayed
[OFOS]
In the output, the name is the port number as seen on the rear panel. The state is of the
local port/peer port. The mode_state is the condition of the link. The guid is the GUID of
the peer port.
f.
If in the output of these commands a port is identified as being in a down
state, or if a link mode_state is other than switching, investigate why.
Refer to the Oracle Fabric OS documentation for assistance.
Exit the host console.
g.
Type
[OFOS] exit
[root@nsn156-168 ~]#
Serial console stopped.
->
6.
Administer the switch from Oracle Fabric Manager or Oracle Fabric OS.
See
"Log In to the Oracle Fabric Manager Interface" on page 94
Fabric OS Interface" on page
Related Information
"Verify LED Status" on page 87
■
"LED Status" on page 88
■
"Verify That the Switch Is Operational" on page 89
■
"Log In to the Oracle Fabric Manager Interface" on page 94
■
"Log In to the Oracle Fabric OS Interface" on page 96
■
"Run the Oracle Fabric OS Configuration Wizard" on page 97
■
"Oracle Fabric OS Configuration Wizard Parameters" on page 98
■
Log In to the Oracle Fabric Manager Interface
1.
From a management network attached host, start a web browser.
94
Oracle InfiniBand Switch IS2-46 Installation Guide • September 2016
up/down
up/down
up/down
up/down
up/down
and press the Enter key, then press the Esc key and type
exit
96.
switching
switching
switching
switching
switching
or
"Log In to the Oracle
0
0
0
0
0
.
(
Advertisement
Table of Contents
