Identify Faults In The Oracle Ilom Event Log - Oracle Sun Network QDR InfiniBand Gateway Switch Service Manual

"Clear a Fault Manually" on page 10
■
▼ Identify Faults in the Oracle ILOM
Event Log
1. Access Oracle ILOM.
See
2. Display the Oracle ILOM event log.
-> show /SP/logs/event/list Class==class Type==type
where you choose class and type from the table in Gateway Administration, log entry
filters.
For example, to display log entries pertaining to all faults, type.
-> show /SP/logs/event/list Class==Fault
Note – If you want to display log entries pertaining to only component failure, use
the show /SP/logs/event/list Class==Fault Type==Fault command.
3. Identify the faulty components in the output.
The Oracle ILOM targets of the faulty components follow the word component.
For example:
-> show /SP/logs/event/list Class==Fault
Event
ID Date/Time
----- ------------------------
18820 Tue Sep 25 13:44:56 2012
Fault detected at time = Tue Sep 25 13:44:56 2012. The suspect component:
/SYS/PSU0 has fault.chassis.device.psu.fail with probability=100. Refer
to http://support.oracle.com/msg/DCSIB-8000-23 for details.
18569 Tue Sep 18 16:43:13 2012
Component /SYS/PSU0 repaired
18567 Tue Sep 18 15:51:48 2012
Fault detected at time = Tue Sep 18 15:51:48 2012. The suspect component:
/SYS/PSU0 has fault.chassis.device.psu.fail with probability=100. Refer
12 Sun Network QDR InfiniBand Gateway Switch Service Manual for Firmware Version 2.1 • March 2013
"Access the Oracle ILOM CLI (NET MGT Port)" on page
Class
--------
Fault
Fault
Fault
Type Severity
-------- --------
Fault critical
Repair minor
Fault critical
35.