Table of Contents
Advertisement
x D. Range Comp
(Dynamic range compressor)
Lets you compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volumes late at
night. Dynamic range compression is possible
with Dolby Digital sources only.
• OFF
The dynamic range is not compressed.
• AUTO
The dynamic range is applied automatically
with Dolby TrueHD source and is set to
"OFF" with other sources.
• STD
The dynamic range is compressed as
intended by the recording engineer.
• MAX
The dynamic range is compressed
dramatically.
Tips
• Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
• "STD" is the standard setting, but it only enacts
light compression. Therefore, we recommend
using the "MAX" setting. This greatly compresses
the dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
compression.
x Distance Unit (Distance unit)
Lets you select the unit of measure for setting
distances.
• meter
The distance is displayed in meters.
• feet
The distance is displayed in feet.
GB
70
Adjusting the equalizer
You can use following parameters to adjust the
tonal quality (bass/treble level) of all speakers.
Bass
Level
(dB)
Note
This function does not work in the following cases.
– The multi channel input is selected.
– "2ch Analog Direct" is being used.
– Dolby TrueHD signals with a sampling frequency
of 176.4 kHz and higher are being received.
– PCM signals with a sampling frequency of
176.4 kHz and higher are being received.
1
Press GUI MODE repeatedly to
select "GUI ON".
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
The Settings menu list appears on the TV
screen.
Treble
Frequency
(Hz)
GUI
MODE
V/v/B/b
MENU
or b.
,
Advertisement
Table of Contents
