8: Setting The Speakers - Sony 4-144-907-43(1) Operating Instructions Manual

8: Setting the speakers

Setting the speaker impedances
Set the appropriate speaker impedance for the
speakers you are using.
1
Press GUI MODE repeatedly to
select "GUI ON".
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
"Settings", then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker", then press
4
Press V/v repeatedly to select
"Impedance", then press
GUI
MODE
5
,
Press V/v repeatedly to select
V/v/B/b
"4
the speakers you are using,
MENU
then press
or b.
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often found on the back of the speaker.)
• When you connect all speakers with a normal
or b.
impedance of 8 ohms or higher, set "Impedance" to
"8 ". When connecting other types of speakers,
set it to "4 ".
• When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both "A" and "B"
configuration:
Set "Impedance" to "8 " in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set "Impedance" to "4 " in the Speaker
settings menu.
" or "8 " depending on
.
.
GB
43