Specifications - Sony 3-289-450-44(1) Operating Instructions Manual

Specifications

Amplifier section
Models of area code CEL, CEK, ECE, AU
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 0.7%)
100 W + 100 W
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
140 W per channel
Models of area code E51
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
85 W + 85 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 0.7%)
100 W + 100 W
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
140 W per channel
1)
Measured under the following conditions:
Area code Power requirements
CEL, CEK, ECE 230 V AC, 50 Hz
AU, E51 240 V AC, 50 Hz
1)
2)
1)
2)
2)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
Frequency response
Analog 10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog Sensitivity: 500 mV/
50 kohms
S/N
(A, 500 mV
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Output (analog)
AUDIO OUT Voltage: 500 mV/
10 kohms
SUBWOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels ±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
3)
: 96 dB
4)
)
continued
97 GB