9: Adjusting The Speaker Levels And Balance (Test Tone); Front Panel Display - Sony 3-289-450-44(1) Operating Instructions Manual

9: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
SHIFT
1
VIDEO 1
4
DVD
Input
7
buttons
-/--
CLEAR />10
2CH/
A.DIRECT A.F.D.
INPUT
AUTO CAL MODE
DISPLAY
2-5
O
RETURN/
EXIT
. <
TUNING –
m
DISC SKIP
TV VOL
MASTER VOL
MUTING
MASTER
VOL +/–
BD/DVD
1
Press AMP MENU.
2
Press V/v repeatedly to select
"LEVEL", then press
3
Press V/v repeatedly to select
"TEST TONE" then press
TV AMP
2 3
VIDEO 2 BD
5 6
SAT TV
8 9
SA-CD/
TUNER
CD
0/10
ENT/MEM
DMPORT
MOVIE MUSIC
NIGHT
SLEEP MODE
AMP
MENU 1
HOME
OPTIONS
TOOLS
MENU
< >
TUNING +
M
D.TUNING
X x
TV CH
PRESET
or b.
.
4
Press V/v to select the test tone
type and the speaker you want
to adjust.
You can select "FIX" or "AUTO". For details,
see "TEST TONE (Test tone)" (page 47).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
5
Repeat steps 1 to 4 to select
"OFF".
You can also press any input buttons.
The test tone turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
When a test tone is output from
a different speaker than the
speaker indicator showed in the

front panel display.

The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.
37 GB