Turning Off The Receiver With The Tv; (System Power Off); Other Operations; Switching Between Digital And Analog Audio (Input Mode) - Sony 3-289-450-44(1) Operating Instructions Manual

Turning off the receiver
with the TV

(System Power Off)

When you turn the TV off by using the
POWER button on the TV's remote, the
receiver and the connected components turn
off automatically.
You can also use the receiver's remote to turn
off the TV.
THEATRE
RM SET UP
SYSTEM STANDBY
SHIFT TV
TV
1
VIDEO 1 VIDEO 2
Press TV, then press AV ?/1.
The TV, receiver and the components
connected via HDMI are turned off.
Notes
• Set the TV Standby Synchro to "ON" before using
the System Power Off function. For details, refer to
the operating instructions of the TV.
• Depending on the status, the connected
components may not be turned off. For details,
refer to the operating instructions of the connected
components.
?/1
AV ?/1
AV ?/1
AMP
2 3
BD

Other Operations

Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog input jacks on the receiver, you can
fix the audio input mode to either of them, or
switch from one to the other, depending on the
type of material you intend to watch.
1
Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are more than one digital connection,
HDMI audio signals have priority over
COAXIAL and OPTICAL audio signals.
If there are no digital audio signals, analog
audio signals are selected.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
continued
75 GB