Using Only The Front Speakers (2Ch Stereo); Listening To The Sound Without Any Adjustment (Analog Direct) - Sony 3-289-450-44(1) Operating Instructions Manual

Using only the front
speakers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the subwoofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel except LFE signals.
2CH/A.DIRECT
Press 2CH/A.DIRECT repeatedly to
select "2CH ST.".
Note
No sound is output from the subwoofer in the 2CH
STEREO mode. To listen to 2 channel stereo
sources using the front left/right speakers and a
subwoofer, select "A.F.D. AUTO" (page 57).
62
GB
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
NIGHT
INPUT
AUTO CAL MODE SLEEP MODE
AMP
DISPLAY
MENU
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input to
2 channel analog input. This function enables
you to enjoy high quality analog sources.
When using this function, only the volume and
front speaker balance can be adjusted.
THEATRE
RM SET UP
SYSTEM STANDBY
SHIFT
1
VIDEO 1 VIDEO 2
4
DVD
7
-/-- 0/10
CLEAR />10
2CH/
2
A.DIRECT A.F.D.
INPUT
AUTO CAL
MODE
1
Press one of the input buttons
to select the input you want to
listen to in analog audio.
You can also use the INPUT SELECTOR
on the receiver.
2
Press 2CH/A.DIRECT
repeatedly to select
"A.DIRECT".
The analog audio is output.
To cancel ANALOG DIRECT
Press 2CH/A.DIRECT again.
You can also press any sound field buttons.
Notes
• When headphones are connected, "HP DIRECT"
appears on the display.
• You cannot select ANALOG DIRECT when you
select BD and DMPORT as input.
?/1
AV ?/1
TV AMP
2 3
BD
5 6
1
SAT TV
8 9
SA-CD/
TUNER
CD
ENT/MEM
DMPORT
Sound field
MOVIE MUSIC
buttons
NIGHT
SLEEP MODE