Operation - Beko VCC 7324 WI User Manual

3 Usage
3.1 Intended use
The appliance was designed for household use
and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (15), push the hose cap (14)
in the arrow direction in order to match it with
the suction nozzle and rotate it clockwise.
2. To remove the hose (15), rotate the hose cap
(14) anti-clockwise and remove it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (3) to the handle (1).
2. Pull the telescopic tube (3) from the handle (1)
to remove it.
3. To adjust the length of the telescopic tube,
push the telescopic tube adjustment latch (4) in
the arrow direction and pull it from the end of it.
Vacuum Cleaner / User Manual
3.4 Attaching/removing the
parquet/carpet brush
1. Attach the telescopic tube (3) to the parquet/
carpet brush (8).
1. Pull the telescopic tube (3) from the parquet/
carpet brush (8) to remove it.
3.5 Adjusting the parquet/car-
pet brush
Perform the following actions on the adjustment
latch (7) located on the parquet/carpet brush (8);
• Use " " position for hard surfaces and
parquet.
• Use " " position for rugs and carpets.

3.6 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
2. Press the on/off button (5) to switch on your
appliance.
3.6.1 Adjusting the suction
power
1. You can adjust the suction power using the
suction power adjustment button (18) found
on the appliance. Rotating in the clockwise
direction (max) will increase the suction power
and in anti-clockwise (min) direction will
decrease the suction power.
2. You can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control (2) located on the handle (1)
without the need to use the suction adjustment
knob found on the appliance.
7 / EN