Cleaning The Filters; Motor Protection Filter; Handling And Transportation - Beko VCC 7324 WI User Manual

4 Cleaning and care

4.2 Cleaning the filters

After each 5 dust bag replacement (may vary
depending on the frequency and area of usage),
clean the filters.
A
WARNING: Do not use appliances
producing hot air such as hair dryer
or heater to dry the filters.
WARNING: Do not install the
filters without completely drying
A
them; otherwise, smell of moisture
may occur during use, water can leak
from the back of the appliance or the
filters may get damaged.
A
WARNING: Attach the filters into
their places after they have dried.

4.2.1 Motor protection filter

1. Open the top lid by pressing the button for
opening the dust container (12).
2. Remove the filter tray by pulling it in the arrow
direction.
3. Remove the foam filter from the grid inside.
4. After washing the motor protection filter under
running water, wring it out slightly and leave it
to dry (for 24 hours minimum).
10 / EN
4.2.2 HEPA filter
1. Press the rear cover opening button to open the
cover and remove the HEPA filter by pulling it
from its handle.
HEPA filter cover
2. Shake off the HEPA outlet filter to eliminate the
dust on it. After that, you can wash it by holding
its clean side under running cool water.
3. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.
4.3 Storage
If you do not intend to use the appliance for a long
time, store it carefully.
• Unplug the appliance.
• Keep the appliance out of the reach of children.
4.4 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or on
the packaging. The appliance may get damaged.
• Dropping the appliance may render it non-
operational or cause permanent damage.
Vacuum Cleaner / User Manual