Scotsman MV 300 Cleaning And Sanitizing Procedures page 5

18. ......the water reservoir inside and outside.
19. With proper brush clean/sanitize the upper side of
the evaporator as well as .....
20. ......the left and right sides and......
21. .......the ice thickness sensor metal plates
22. Install again parts removed at item 8, 9, 10, 11, 12
and 13 proceeding in reverse.
23. Place again the water distribution tube into their two
metal clips paying attention that its plastic pin
matches the center hole then .....
24. ......install the Ice Thickness sensor