Recording - Sony TA-FA777ES Operating Instructions Manual

Sony operating instructions integrated stereo amplifier ta-fa777es
Hide thumbs Also See for TA-FA777ES:
Table of Contents

Advertisement

Available languages

Available languages

Recording

U
PHONES
See pages 4 and 5 for hookup
information.
z
You can record the same
source on up to three
recording components at
the same time.
Recording is not possible,
however, from the TAPE3
jacks to the TAPE1/DAT or
TAPE2/MD jacks.
z
You can monitor the
recorded sound by setting
INPUT SELECTOR
But only if your tape deck has
separate recording and
playback heads. To monitor
the sound being recorded
from the TAPE1/DAT jacks,
for example, set INPUT
SELECTOR to TAPE1/DAT.
z
You can listen to one
programme source while
recording from another
This is because your amplifier
outputs signals for recording
and the speakers separately.
For example, set INPUT
SELECTOR to TUNER and
REC OUT SELECTOR to
SACD/CD.
1
28
36
SOURCE DIRECT
46
55
SPEAKERS
BASS
TONE
TREBLE
BALANCE
66
ON
0
0
OFF
80
–10
+10
–10
+10
LEFT
RIGHT
1
Press U (POWER) to turn on the amplifier.
The POWER indicator changes from red to green. Turn
ATTENUATOR fully counterclockwise to prevent damaging
the speakers with excessive output.
2
Turn on the programme source you want to record.
3
Select the component that you want to listen to by turning
INPUT SELECTOR.
4
Select the programme source that you want to record by
turning REC OUT SELECTOR.
To record a
Record
Radio broadcast
Super audio CD/Compact disc
Source connected to AUX
Source connected to:
—TAPE2/MD
—TAPE1/DAT
5
Set REC OUT to ON.
When set to OFF, recording from a programme source is not
possible, except from the TAPE2/MD IN jacks to the TAPE1/
DAT or TAPE3 REC OUT jacks, or from the TAPE1/DAT IN
jacks to the TAPE2/MD or TAPE3 REC OUT jacks.
6
Prepare the recording component for recording, then start
recording.
7
Start playing the programme source.
Adjust the volume by turning ATTENUATOR.
Basic Operations
3
ATTENUATOR
15
21
13
INPUT SELECTOR
AUX
11
TAPE 3
SACD/CD
9
TAPE 2 / MD
TUNER
7
TAPE 1 / DAT
PHONO
5
3
RECOUT SELECTOR
AUX
TAPE2
c
1/3
SACD/CD
REC OUT
1
0
TAPE1
2/3
TUNER
ON
c
dB
PHONO
OFF
(AUX, CD, TUNER, PHONO)
7 4 5
Set REC OUT SELECTOR to
PHONO
TUNER
SACD/CD
AUX
TAPE2 c 1/3
TAPE1 c 2/3
7
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents