Table of Contents
Advertisement
BAG7
Assembly Turbine To Turbine Support
Turbine support
(S0114-S)
Turbine block
[S0121]
NOTE:
No use loctice in screws.
Page 22
Check the assembly centerdistance of your own turbine. Use this dimensions to
define the drilling position of the aluminum support. Drill the red hole 5mm diameter.
NOTE: We recommend installing the turbine the most forward as possible to optimaze the CG.
Socket head cap
screw M3x12mm
(HC062-S)
Turbine block
[S0121]
TURBINE SUPPORT ASSEMBLY
Position the turbine group and find the correct position to make the 4 holes 5mm.
5mm holes
Advertisement
Table of Contents
