Disclaimer Of Warranties And Limitation Of Liability - Eaton NRX Series Instruction Leaflet

Instructional Leaflet IL01301014E
Effective July 2016
Disclaimer of warranties and limitation of
liability
The information, recommendations, descriptions, and safety
notations in this document are based on Eaton's experience and
judgment, and may not cover all contingencies. If further infor-
mation is required, an Eaton sales office should be consulted.
Sale of the product shown in this literature is subject to the
terms and conditions outlined in appropriate Eaton selling poli-
cies or other contractual agreement between Eaton and the
purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR
MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET
OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES.
ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF
EATON. THE CONTENTS OF THIS DOCUMENT SHALL NOT
BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN
THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage or
loss whatsoever, including but not limited to damage or loss of
use of equipment, plant or power system, cost of capital, loss
of power, additional expenses in the use of existing power facili-
ties, or claims against the purchaser or user by its customers
resulting from the use of the information, recommendations, and
descriptions contained herein.
The information contained in this manual is subject to change
without notice.
EaoNn
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. IL01301014E / TBG001307
Part No. IL01301014EH03
July 2016
Series NRX fixed circuit breaker arc
hood installation and removal
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
instructions