Table of Contents
Advertisement
30 Testing and adjusting
[KOMTRAX message]
There are 2 types of KOMTRAX message; 1 is
q
for the user and the other is for the service.
For user:
q
A message transmitted from the KOMTRAX
base station for the user. If it is received, the
message monitor is displayed on the ordinary
screen. To see the contents of the message,
operate "Message display" in the above user
menu.
For service:
q
A message transmitted from the KOMTRAX
base station for the service. Even if it is
received, nothing is displayed on the ordinary
screen. To see the contents of the message,
operate "KOMTRAX message" display in the
service menu.
PC210, 230, 240-8
Display of energy-saving guidance
When the machine is set in a certain operating con-
dition, the energy-saving guidance screen is dis-
played automatically to urge the operator to the
energy-saving operation.
a The energy-saving guidance is displayed when
the following condition is satisfied while the
display setting is set effective in the service
mode.
a Condition for display:
Engine is running + All levers have been in
neutral for 5 minutes + Caution (Note) or user
code is not generated (Note)
Note: Excluding hydraulic oil low temperature
caution
a If any lever or pedal is operated, or [F5] is
pressed, the screen returns to the ordinary
screen.
Display of caution monitor
If an abnormality which displays a caution monitor
occurs on the ordinary screen or camera mode
screen, the caution monitor is displayed large for a
moment and then displayed at (a) in the screen.
a On the camera mode screen, the caution mon-
itor flashes at the left upper of the screen when
the caution is generated.
UEN00229-01
15
Advertisement
Table of Contents
Troubleshooting
