Black & Decker BWE15A Use & Care Book page 9

2,
3,
4.
5.
Place the window lock bracket as shown. Use a 1/s" d rill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
Attach the window lock bracket to the upper window with one
3142" s crew to secure the window in place.
Plug into a grounded 3 prong outlet.
Press RESET on the power supply cord. See "Electrical
Requirements."
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
2. Press RESET on the power supply cord. See "Electrical
Requirements."
Return chassis to the outer case
Find someone to help you replace the chassis in outer case.
Replace front panel and grille.
IF AC IS BLOCKED BY STORM WINDOW
• Add wood as shown in FIG.6,or remove storm window
before air conditioner is installed.
• If storm window frame must remain,be sure the drain
holes or slots are not caulked or painted shut.
Accumulated rain water or condensation must be allowed
to drain out.
i
ij .,,
Sash
1-1/2"MIN
Storm window (38mm)
frame or other
obstruction | _--
- yj
Board thickness
as required,for
proper pitch to
_{ rear,along entire
sill,fasten with
nails or screws.
iMPORTANT: Because the window sash helps keep the unit in win-
dow, make certain the window sash contacts the outer case before
reinstalling the chassis.