Key Points Of Pcb Layout Design; Positioning An Esp32 Module On A Baseboard - Espressif Systems ESP32 Design Manuallines

!
!
!

2.2. Key Points of PCB Layout Design

2.2.1. Positioning an ESP32 Module on a Baseboard

Place the module's PCB antenna area outside the baseboard, but put the module as close
to the edge of the baseboard as possible, so that the antenna's feed point is closest to the
board edge. For example:
Espressif
Figure 2-1. Non-recommended Trace Routing
Figure 2-2. Non-recommended Trace Routing
9 ! /19
2. PCB Layout Design
2019.01