Table of Contents
Advertisement
3 - Description
AutoHeight Sensor Capabilities and Limitations
The AutoHeight sensors are designed and built specifically for agricultural purposes. However, the ultrasonic transducer
must be clean and dry for optimal performance. The foam disc fitted into the bottom of the sensor protects the transducer
from dust. If the protective foams become wet (from rain, drift from the spray nozzles etc.) the sensors may have trouble
reading.
The height sensors will provide height readings from 22 to 300 cm, under typical conditions. In order to optimize sensor
performance, the AutoHeight sensor has a minimum distance that it will read (also known as the blanking range). As a result,
the AutoHeight sensor is designed to ignore targets closer than 20 cm from the bottom of the sensor housing.
17
Advertisement
Table of Contents
