Tool Description - HP EliteDesk 705 G1 Disassembly Instructions Manual

including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.

Tool Description

Screwdriver
Micro shear
Screwdriver
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove the access panel.(see Figure 1 below)
2. Rotate the driver cage form the hook on slide rail.(see Figure 2 below)
3. Disconnect SATA cables from the MB.(see Figure 3 below)
4. Disconnect other PSU cables from the MB.(see Figure 4-9 below)
5. Remove HDD/ODD from chassis.(see Figure 10-16 below)
6. Remove the heatsink from MB.(see Figure17-19 below)
7. Separate the fan from CPU heatsink.（see Figure 20-21 below）
8. Remove the CPU from the MB.(see Figure 22-23 below)
9. Remove the Memory card from the MB.(see Figure 24 below)
10. Remove the battery from the MB .(see Figure 25 below)
11. Remove M/B from chassis.(see Figure 26-27 below)
12. Remove front panel from chassis.(see Figure 28 below)
13. Remove FIO/Speaker/LED holder from chassis.(see Figure 29-31 below)
14. Remove PSU cover.(see Figure 32-36 below)
15. Disconnect all the cables and remove the Electrolytic Capacitors.(see Figure 37-41 below)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
chambers, and service stations.
PSG instructions for this template are available at EL-MF877-01
Tool Size (if
applicable)
T-15
170II
PH1
Page 2