Installation Instructions - GE PKW7000 Series Owner's Manual & Installation Instructions

Electric warming drawer
Table of Contents

Advertisement

Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com
In Canada: 800.561.3344 or visit GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer –
instructions with the Consumer.
Note to Consume –
future reference.
Product failure due to improper installation is not
covered under the Warranty.
WARNING
grounded.
WARNING
not contact the hot surfaces on the bottom of
ovens, cooktops, or any other appliance.
is the responsibility of the installer and
product failure due to improper installation is
NOT covered under warranty.
10
– Save these instructions
– Observe all governing
This appliance must be properly
Insure that the power cord does
– Proper installation
Warming Drawer
PKW7000 and PTW9000
MATERIALS YOU WILL NEED
2 x 4 or 2 x 2 lumber for runners and brace
Wood screws and adhesive or other hardware for
installing runners or shelf to support warmer drawer.
Runners must be level, rigidly mounted and capable of
supporting 150 pounds.
TOOLS REQUIRED
Hand Saw
Phillips Screwdriver
Cut Resistant Gloves
Safety Glasses
Measuring Tape
49-2000658 Rev. 0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptw9000 seriesPtw9000snssPkw7000snss

Table of Contents